© 2008 Stevens AeroModel.
Page 14 of 52
12. Install the 3/32 in. balsa former F11 (previously assembled in step 1)
13. Bond the 1/16 in. ply part G2 (sheet 20/21) into position directly aft of F15 as illustrated. Build up a solid glue
fillet between G2 and surrounding structure on inside of fuselage.
14. Locate the following parts: 1/16 in ply former F9 (20/21) and 1/16 in. balsa part F16 (sheet 2/21). Key F16 to
the back side of F9 using the notches in F9 to register the part. Now key the assembly to one of the fuselage
sides as illustrated below. Retain parts with thin CA glue.
Do not glue the second fuselage side to the
assembly at this time.
