© 2008 Stevens AeroModel.
Page 8 of 52
General Assembly Instructions
A
A
B
B
A
B
H S-65 HB
D
D
R10
R9
R11
R6
Thank you, for purchasing this
Stevens Aeromodel
HeliumMG2 – “2-Meter Motorized Glider / FPV Platform”. This kit
provides the builder and pilot a refreshing change of pace from heavy “ARF” style plywood box airframe construction, and
blends stick and tissue design methods of the past with state of the art CAD technology and precision interlocking laser
cut parts. The result is something you will find truly exceptional to build and fly. Please keep in mind that this kit is
intended for a novice-intermediate builder and novice-intermediate pilot as a 3 channel motor glider/trainer. If you do not
meet these criteria it is recommended to seek help from a more experienced builder / pilot.
Best Regards,
Bill Stevens
[email protected]
Stevens AeroModel
“Laser Engineered”
P.O. Box 15347
Colorado Springs, CO 80935
Assembly Tips
READ THE INSTRUCTIONS
and the plan sheet prior to starting any work!
Tape plans to work table. Protect plans from glue spills using the poly tubing your kit was bagged in.
Join all parts with Thin CA unless otherwise specified.
DO NOT REMOVE THE PARTS FROM THE BALSA SHEETS UNTIL REQUIRED!
DO NOT FORCE THE FIT.
When in doubt, double check your parts. Removal of material should not be
required. If you feel that you have a poor connection, check first to see that the part is not upside down.
Reference each piece against the plan sheet.
Making solid glue joints: Hold parts together on top of plan sheet using moderate pressure to fit parts. Wick
Thin CA into joint. There is no need to pin parts to work table as all pieces interlock and self - jig.
