© 2008 Stevens AeroModel.
Page 34 of 52
Wing Tips
Build right and left wing tips mirrored on the building board and in tandem to prevent building two of the same side.
1.
Begin wing tips by locating the 1/16 in. balsa spar web S2 (sheet 04/21) and 1/16 in. lower spar cap strip S4
(sheet 04/21). Orient parts identical to photo below (mirrored and in tandem) then tack glue at tab and notch
locations.
2.
Key ribs R7, R8, R9, and R10 to spar as illustrated below (sheet 03/21). Verify that ribs are properly seated to
spar web and square then tack glue with thin CA.
3.
Key 1/8 in balsa trailing edge TE2 (sheet 09/21) to wing tip assembly and secure by tack gluing at notch
locations where ribs interface with trailing edge.
