© 2008 Stevens AeroModel.
Page 35 of 52
4.
Join 1/8 in. balsa end rib R11 (sheet 09/21) to both right and left wing tip assemblies as illustrated below. Tack
glue using thin CA glue.
5.
Fit 1/8 in. balsa wing tip W7 (sheet 09/21 and 11/21) to assembly as illustrated. W7 tabs to R11 end rib and fits
flush against wing trailing edge TE2 to square wing tip assembly.
6.
Fit the 1/16 in. balsa upper spar cap S6 (sheet 04/21) to wing tip assembly and tack glue at tab and notch
locations.
7.
Create wing dihedral break rib R6 by laminating 1/32 in. ply outer rib facing R6a (sheet 19/21) to 3/32 in. balsa
rib R6 (sheet 05/21). Follow assembly method detailed in step 14 of Wing Center Section assembly.
