![background image](http://html.mh-extra.com/html/stertil-koni/sky-200/sky-200_installation-operation-and-maintenance-instructions_1375428018.webp)
Safety instructions
Operation & maintenance instructions (Version H)
18
SKY-200/250
• Before operation of the vehicle lift, the operator
must assure himself that no persons or objects
are present under, on or in the immediate
proximity of the vehicle lift (including vehicles).
• During lifting and lowering watch the vehicle
thoroughly. Obstacles (trestles etc.) underneath
the vehicle during lowering can cause dangerous
situations and damage. The placement of an
excessively high vehicle on the lift can also cause
dangerous situations and damage during lifting.
• Standing on or under the vehicle lift (with load)
when the lift is operated is not permitted. Climbing
on the lift or vehicle is also not permitted.
• In the event of faults and after work, position the
vehicle lift always at its lowest setting and switch
off the main switch of the control box. This means
that the main switch should be turned to the 0
position and is to be secured with a padlock.
• Danger of getting injured by electrical shock.
• Care must be taken as burns can occur from
touching hot parts.
• Only remove the covers to carry out maintenance,
ensure that the vehicle lift is disconnected from
the power supply.
Summary of Contents for SKY-200
Page 152: ...Operation maintenance instructions Version H 152 SKY 200 250 ...
Page 153: ......