Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
22
5.8.2. Circle cutting attachment for 400
–2500 mm radius
Allows
cutting
holes
with
the
radius
of
400
–2500
mm
(1.3
–8.2 ft;
when used with
the
standard rack). To install, use the 3 mm hex wrench and unscrew two front screws
from the bottom plate and use them to install the bracket. Next, use the 5 mm hex
wrench to install the arm to the side wall with two M6x30 screws. Place the tip of the
pilot pin in the center of the circle and
lock the levers of the clamping blocks.
Part number:
CYR-0475-83-00-00-0
