Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
9
3. STARTUP AND OPERATION
3.1. Preparing
Before starting, clean the wheels of the carriage and remove the anti-corrosion coating
from the track. Use the carrying handle to transport the carriage to the worksite. Set
the power switch and the travel direction switch to
‘O’, and set the clutch to OFF.
Then, plug the power cord into the power source and insert the torch into the torch
holder (Fig. 1).
Fig. 1.
Design of the precise machine torch holder for oxy-fuel cutting (a) and of the precise
torch holder for plasma cutting (b)
Handle securing
the torch angle
Torch vertical position
adjustment knob
Torch holder diameter
adjustment screw
Torch vertical position
adjustment knob
Set screw
Knob securing the torch
in the holder
Handle
securing
the rack
Adjusting screws
b)
Fixing screws
a)
