Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
7
2. SAFETY PRECAUTIONS
1. Before starting
, read this Operator’s Manual and complete proper occupational
safety and health training.
2.
Use only in applications specified in this Operator’s Manual.
3. The
carriage
must
be
complete
and
all parts must be genuine and fully functional.
4. The
specifications of the power
source
must
conform
to
those
specified
on
the
rating
plate.
5. Connect the carriage into a properly grounded power source.
6. Never carry the carriage by the cords or arc ignition cable and never pull them
because this may damage them and result in electric shock.
7. Untrained bystanders must not be present near the carriage.
8. Before starting, ensure the correct condition of the carriage, power source, power
cords, arc ignition cable, plugs, and control panel.
9. Keep the carriage dry, and never expose it to rain, snow, or frost.
10. Keep the work area well lit, clean, and free of obstacles.
11. Never use near flammable liquids or gases, or in explosive environments.
12. Transport and position the carriage by using the carrying handle.
13. Do not stay below the carriage placed at heights.
14. Plug the cords and arc ignition cable into sockets only when the power switch is
set to
‘O’.
15. Keep the sockets clean. Do not use compressed air for cleaning.
16. Install
only
torches
which handle diameter is the same as the diameter of the
torch holder in use.
17. Keep the torch cables from coming in contact with the surface. They must be
suspended to reduce the load of the carriage.
18. Use the torch according to the torch manual.
19. Use the carriage in horizontal positions only.
20. Always use eye protection (helmet, shield, and screen), hearing protection, gloves,
and protective clothing during work. Do not wear loose clothing.
21. Before every use, inspect the carriage to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the carriage.
