stayer EPG300, Operating Instructions Manual

Page: 17 / 36

Thank you very much for acquiring a STAYER product!
We congratulate you for having elected a STAYER Electric
spray gun. We are sure that this modern tool will fully
comply with your expectations.
The power tool is intended for atomising solvent-based and
water-dilutable paints, finishes, primers, clear finishes,
automotive finishes, staining sealers, wood sealer-
preservatives, plant protectives, oil and disinfection agents.
To ensure appropriate operation and
performance of your new chain saw and to
safeguard your own safety, it is mandatory
that you carefully read this instruction
manual before using the Electric spray gun.
Take special care in observing all safety
precautions! If you do not observe these
precautions you may suffer severe injuries or
even die!
Packaging
Your STAYER Electric spray gun will be
delivered to you in a protective cardboard
box so as to avoid damages during transport.
Cardboard is a basic commodity and thus
reusable and suitable for recycling (recycling
of used paper).
1. Contents
page
2.Specific safety instructions ......................................13
3.Instructions for use ....................................................14
3.1 Placement Tool.............................................................14
3.2 Assembly......................................................................14
3.3 Electrical connection.............................................14
3.4 Illustrated description............................................14
4.Operating instructions ..............................................14
4.1 Placement and testing..........................................14
4.2 Adjustment operation............................................15
4.3 Correction of Malfunctions....................................15
5.Maintenance and service instructions .....................15
5.1 Cleaning...............................................................15
5.2 Repair service.......................................................15
5.3 Warranty...............................................................16
5.4 Disposal and recycling..........................................16
6.Regulations ................................................................16
6.1 Technical Data......................................................16
6.2 EU declaration of conformity.................................16
2. Specific safety instructions
Read all safety warnings, instructions including
Material.
Workplace safety
Ÿ
Keep area clean well lit and free of paint or solvent
containers, rags, and other flammable materials.
Spontaneous combustion may occur. Fire extinguisher
equipment shall be present and working at all times.
ENGLISH
13
13
Ÿ
Provide for good ventilation in the spraying area and
for sufficient fresh air in the complete room.
Evaporating inflammable solvents create an explosive
environment.
Ÿ
Do not use materials with a flashpoint below 21 °C for
spraying and cleaning. Use water-based materials,
non-volatile hydrocarbons or similar materials.
Fast
evaporating solvents create an explosive environment.
Ÿ
Do not spray in the vicininty of ignition sources, such
as static electricity sparks, open flames, pilot lights,
hot objects, engines/motors, cigarettes and sparks
from plugging in or unplugging power cords or
operating switches.
Such spark sources can ignite the
spraying vicinity/environment.
Ÿ
Do not spray any liquid of unknown hazard potential.
Unknown materials can create hazardous conditions.
Personal safety
Ÿ
Wear additional protective equipment such as
appropriate protective gloves and protective masks
or respirators when spraying or handling
chemicals.
Wearing protective equipment for the
appropriate conditions reduces the exposure to
hazardous substances.
Ÿ
Never point the spray jet against yourself, towards
other persons or animals. Keep your hands and
other body parts away from the spray jet. If the spray
jet should penetrate the skin, seek medical attention
immediately from a doctor.
The material being
sprayed can even penetrate the skin through a glove
and be injected into your body.
Ÿ
Do not treat injection as a simple cut. Highpressure
spray is able to inject toxins into the body and cause
serious bodily injury. In the event that injection occurs,
seek medical attention immediately.
Ÿ
Be aware of possible hazards from the spray
m a t e r i a l . O b s e r v e t h e i n f o r m a t i o n o n
drums/tanks/tins as well as manufacturer
information of the spray material, including the
request to wear personal protective equipment.
The
manufacturer's instructions are to be observed in order
to reduce the risk of fire as well as injuries caused
through toxins, carcinogens, etc.
Use and Handling of the Power Tool
Ÿ
Use only nozzles/nozzle inserts specified by the
manufacturer. Never spray without the nozzle
protection mounted.
Use of a special nozzle insert with
the corresponding nozzle protection reduces the
probability that a high-pressure jet penetrates the skin
and injects toxins into the body.
Ÿ Exercise caution when cleaning and changing
nozzle inserts. If the nozzle insert should become
clogged during spraying, follow the manufacturer's