Page 27 of 54
In a nonlinear process
it is possible to program up to 11 points
input-display. Each two points are connected by a straight line and
the whole curve represents the relationship between the input
value and the display value.
In order to obtain more accuracy in the measuring it is
recommended to program the highest possible number of points
and reduce the segment length.
Input values must always be programmed in an increasing
or decreasing order. Avoid assigning two different display
values to two equal input values
.
Display values can be entered in any order and even be repeated
for different inputs.
Below the first point programmed, the relationship established
between the two first points of the scale is followed. Above the last
point programmed, the relationship established between the two
last points of the scale is followed.
Input
Display
