Page 9 of 54
Selecting an option from the list
When the parameter is an option to be chosen among different
possibilities, the
key allows you to browse through the list of
options until you find the desired parameter.
2.1 – Power Supply and connectors
WARNING: If not installed and used in accordance with
these instructions, protection against hazards may be
impaired.
In order to guarantee the electromagnetic compatibility, the
following guidelines should be kept in mind:
-
Power supply wires should be
routed separately from signal
wires.
-
Never run power and signal wires
in the same conduit.
-
Use shielded cable for signal
wiring and connect the shield to
the ground of the indicator.
-
The cable section should be >0.25
mm
2
INSTALLATION
To meet the requirements of the directive EN61010-1, where the
unit is permanently connected to the mains supply, it is obligatory
to install a circuit breaking device within easy reach of the operator
and clearly marked as the disconnect device.
1
2
