Page 15 of 54
3.1 – Program process input
When used as a process indicator, the parameter to configure is the
input type, in volts (-10 to 10) Vdc range or in milliamperes (-20 to
20) mA range.
3.1.1 – Sensor connection (V, mA)
Refer to wiring guidelines in (Sec. 3.1.2/3)
Instrument rear view
CONNECTOR SIGNAL INPUT
CN2
PIN 1 =
-EXC
[excitation output (-)]
PIN 2 =
+EXC
[excitation 24 V (+)]
PIN 3 =
+EXC
[excitation 5 V or 10 V (+)]
PIN 4 =
N/C
[no connection]
PIN 5 =
+IN
[input mA (+)]
PIN 6 =
+IN
[input V (+)]
PIN 7 =
N/C
[no connection]
PIN 8 =
-IN
[input V (-), mA (-)]
CN2
1 2 3 4 5 6 7 8
