STARPLUS Triad 1 Product Description Manual Download Page 361

Page: 361 / 496

Peripheral Boards

11-13

Chapter 11 - Triad 3 System Configuration

T-1 Interface Board (T1IB)

The T1IB board allows the network connection to a T-1 1.544MB digital interface.

This board supports standard D4 framing format with robbed bit signaling. Extended
Super frame (ESF) format is also supported.

The board can support TIE, Loop and Ground start signaling emulation per channel.

The board requires an external CSU unit.

The board has a 15-pin D-Sub connector for connection to a CSU unit.

A Normal/Service switch located toward the top of the card allows the card to be inserted
or removed from the system while under power.

The T1IB card can accept up to two DTMF-A units in a daughter board type arrangement

The Phase Lock Loop unit (PLLU) must be installed on the MPB in order for the T1IB board
to operate properly.

The card ejector tabs are color coded white.

Figure 11-8: T1IB (T-1 Trunk Board)

This board can only be installed in the Basic Cabinet (BKSU) Slots 0-8. A maximum
of six T1IB boards can be installed in the system.

Summary of Contents for Triad 1

















































































































































































































































































































































































































































































































Search results

Summary of Contents for Triad 1

Reviews:

Brands by name

Popular brands

STARPLUS Triad 1, Product Description Manual

Search results

Summary of Contents for Triad 1

Reviews:

Brands by name

Popular brands