STARPLUS Triad 1, Product Description Manual

Page: 167 / 496

Save Number Redial (SNR) 5-53
Chapter 5 - Electronic Telephone Operation
3. Once the line queue is answered and the LCD indicates an outgoing CO line display:
Press the Redial flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset. Line is seized and the number dialed. If user receives a busy/no answer,
Step 1 is repeated to activate another redial.
Cancelling the Operation
Press the preprogrammed Redial flexible button. A confirmation tone sounds and the Auto
Redial function is cancelled.
Conditions
Once the user presses the preprogrammed flexible button, there is no timer applied until the
user enters a digit. Once a digit is entered, the inter-digit timer applies between the digits.
Save Number Redial (SNR)
Saving the Last Number Dialed
1. After placing an outside call, keep handset off-hook.
2. Press the SPEED button twice.
Dialing a Saved Number (using Last Number Dialed Steps)
1. Press the SPEED button.
2. Dial the asterisk [
.
] button.
System automatically selects the original line used to place the call and redial the
number.
If that line is busy, the system automatically selects another line from the same group
and redial the number.
If no lines are available in the same group, station receives a busy tone and can queue
for a line.
If the station user preselects a line before activating SNR, the preselection overrides
the line which was used originally.
Speakerphone
1. Press ON/OFF button to ON. Intercom dial tone sounds.
2. Press the DSS button of the desired party, or press an available outside line button and
dial number. Speakerphone is activated.
3. Press ON/OFF button to OFF to end call.
For further references in this section where lift handset is specified, you may also
use the method of pressing the ON/OFF button, if the telephone is programmed
to be a true two-way speakerphone.