manualshive.com logo in svg

STARPLUS Triad 1, Product Description Manual

Share
Download
STARPLUS Triad 1 Product Description Manual Download Page 264

7-10

Call Park

Chapter 7 - Single Line Telephone Operation

Call Park

Call Park - System

The Call Park feature enables an outside call to be placed on hold and consult with, page, or 
call an internal party prior to transfer.

While connected to an outside line:

1. Press and release the hookswitch. The caller is put on Exclusive hold.

2. Dial parking location (430 to 437) on the dial pad. A confirmation tone sounds.

3. If you hear busy tone, press and release the hookswitch to re-establish contact with the 

called station, and press and release the hookswitch again prior to dialing another 
parking location.

Retrieving a Parked Call

1. Lift handset.

2. Dial [#] on the dial pad.

3. Dial parking location (430 to 437) where the call was parked.

Call Park - Personal

While Connected to First Call:

1. Press the hookswitch momentarily. Intercom dial tone sounds.

2. Dial [438] on the dial pad (call is placed in personal park).

3. Dial desired number for second call.

4. Press the hookswitch momentarily. Intercom dial tone sounds.

5. Dial [438] on the dial pad (first call is returned and second call is placed in Personal Park).

Call Park - Station

While connected to an outside line:

1. Press the hookswitch momentarily.

2. Dial [439] + XXX (XXX = station number).

Retrieving a Station Park Call

Dial [# 6] + XXX (XXX = user’s station number, while at the user’s telephone or from any 
telephone in the system).

-or-

Dial [438] from the user’s station.

The user can alternately connect to the other call by doing a hook-flash and 
dialing [438] as many times as necessary.

Summary of Contents for Triad 1

















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands