Stanley QPM CORDLESS TOOL, Instruction Manual

Page: 30 / 56

Cordless Tool
24
Charger
2.2.3.1 Charge Indicators
PACK CHARGING
PACK CHARGED
x
HOT/COLD DELAY
PROBLEM PACK OR CHARGER
PROBLEM POWERLINE
This charger is designed to detect certain problems that can arise. Problems are indicated by the red light flashing
at a fast rate. If this occurs, re-insert the battery pack into the charger. If the problem persists, try a different
battery pack to determine if the charger is working properly. If the new pack charges correctly, then the original
pack is defective and should be returned to a service center or other collection site for recycling. If the new
battery pack elicits the same trouble indication as the original, have the charger and the battery pack tested at
an authorized service center.
2.2.3.2 Hot/Cold Delay
This charger has a hot/cold delay feature: when the charger detects a battery pack that is hot, it automatically
starts a delay, suspending charging until the battery pack has cooled. After the battery pack has cooled, the
charger automatically switches to the battery pack charging mode. This feature ensures maximum battery pack
life. The red light flashes long, then short while in the hot/cold delay mode.
2.2.3.3 Leaving the Battery Pack in the Charger
The charger and battery pack can be left connected with the charge indicator showing pack charged.
2.2.3.4 Weak Battery Packs
Weak battery packs will continue to function but should not be expected to perform as much work.
2.2.3.5 Faulty Battery Packs
This charger will not charge a faulty battery pack. The charger will indicate faulty battery pack by refusing to light
or by displaying problem pack or charger.
NOTE: This could also mean a problem with a charger.
2.2.3.6 Problem Power Line
Some chargers have a Problem Powerline indicator. When the charger is used with some portable power sources
such as generators or sources that convert DC to AC, the charger may temporarily suspend operation, flashing the
red light with two fast blinks followed by a pause. This indicates the power source is out of limits.
2.2.3.7 Important Charging Notes
Longest life and best performance can be obtained if the battery pack is charged when the air temperature
is between 65°F and 75°F (18° – 24°C). DO NOT charge the battery pack in an air temperature below +40°F
!