Stanley QPM CORDLESS TOOL, Instruction Manual

Page: 51 / 56

Instruction Manual
45
Maintenance
4.2.4 Lubrication
Proper lubrication is required for satisfactory operation.
This grease specification is for all planetary, bevel and crowfoot/tubenut gearing and o-ring lubrication. STANLEY
Assembly Technologies specifies the grease at the amounts indicated.
4.2.4.1 Planetary, Bevel and Crowfoot/Tubenut Gearing
Fill to approximately 80% of capacity of housing with Dow Corning MOLYKOTE® G-4700 Extreme Pressure
Synthetic grease or Kluber Lubrication Isoflex Topas NB 52 grease.
4.2.4.2 Bearing Surfaces, Splines and Couplers
Place a light coating of Dow Corning MOLYKOTE® G-4700 Extreme Pressure Synthetic grease or Kluber Lubrication
Isoflex Topas NB 52 grease on surfaces.
4.2.4.3 O-Rings
Coat O-rings with Parker O-lube before assembly.
4.2.5 Cleaning
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may
weaken the plastic materials used in these parts.
Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
4.3 Disposal
CAUTION
ENVIRONMENTAL HAZARD
To Avoid Personnel / Environment Contamination:
• Dispose of all materials used for maintenance properly and in accordance with local laws and regulations so
as not to impose hazards to personnel or the environment.
• Catch all fluids (oil, grease) drained or removed from the tool and dispose of them in accordance with local
laws.
• Do not dispose of battery packs into standard housekeeping refuse, fire or any body of water.
Follow all local laws or regulations such as the European WEEE directive for disposal of equipment.
Separate the packing material from the tool, battery pack and charger and their manuals. Dispose of the packing
materials into recycling bins.
Return the used/ defective tool, battery pack or charger to the end user collection facility or to a local service
center.