Stanford Research Systems SR865A, Operation Manual

Page: 162 / 221

144 Programming Chapter 4
SR865A DSP Lock-in Amplifier
KEYC(?) { ON | MUte| i }
The KEYC i command turns sounds on (i=0) or off/mute (i=1). This is primarily the key
and knob clicks but also includes various system sounds.
Example
KEYC MUTE Turn system sounds off
KEYC 1
KEYC?
Returns the system sounds state i
PRMD(?) { SCReen | PRNt | MONOchrome | i }
The PRMD i command sets the screen shot mode to screen (i=0), print (i=1) or
monochrome (i=2).
Example
PRMD SCR Set the screen shot mode to screen
PRMD 0
PRMD?
Returns the screen shot mode i
SDFM(?) { CSV | MATfile | i }
The SDFM i command sets the data file format to csv (i=0) or Matlab (i=1).
Example
SDFM CSV Set the data file format to csv
SDFM 0
SDFM?
Returns the data file format i
FBAS(?) { s }
The FBAS s command sets the file name prefix to the string s. The string s must be
within quotes (" "). All letters will be converted to upper case. The string s is limited to 7
characters and may only contain characters which are allowed in DOS file names.
Example
FBAS "F65" Set the file name prefix to “F65”
FBAS "f65"
FBAS?
Returns the file name prefix
FNUM(?) { i }
The FNUM i command sets the file name suffix to value i. If the value of i would make
the filename exceed 8 characters, the suffix will be set to 0. For example, if the file name
prefix is “SR865_” (6 characters) then
FNUM i can set the suffix to 0
–
99 (limited to 2
characters).
Example
FNUM 12 Set the file name suffix to 12
FNUM?
Returns the file name suffix