Stanford Research Systems SR865A, Operation Manual

Page: 15 / 221

Commands xiii
SR865A DSP Lock-in Amplifier
CAPTURERATE(?) { n } 136 Set the capture rate to (max rate)/2 n
CAPTURESTART [ ONEshot | CONTinuous | i ] , [ IMMediate |
TRIGstart | SAMPpertrig | j ] 137 Start capture (OneShot or Cont) (HW trigger off/on)
CAPTURESTOP 137 Stop capture
CAPTURESTAT? 137 Query the capture buffer state
CAPTUREBYTES? 138 Query the number of bytes filled by captured data
CAPTUREPROG? 138 Query the length (kB) of captured data (after stop)
CAPTUREVAL? [ n ] 138 Query the n th sample (1, 2 or 4 values) (after stop)
CAPTUREGET? [ i ], [ j ] 139 Download binary capture buffer
Data Streaming Commands page description
STREAMCH(?) { X | XY | RT | XYRT | i } 140 Configure streaming to X, XY, R
θ
or XYR
θ
(0–3)
STREAMRATEMAX? 141 Query the maximum streaming rate
STREAMRATE(?) { n } 141 Set the streaming rate to (max rate)/2 n
STREAMFMT(?) { i } 141 Set the streaming format to float32 (0) or int16 (1)
STREAMPCKT(?) { i } 141 Set packet size to 1024, 512, 256 or 128 bytes (0–3)
STREAMPORT(?) { i } 142 Sets the Ethernet port to i=1024–65535
STREAMOPTION(?) { i } 142 Sets big/little endianness and integrity checking
STREAM(?) { OFF | ON | i } 142 Turn streaming off/on
System Commands page description
TIME(?) [ SEConds | MINutes | HOUrs | j ] { , i } 143 Set time
DATE(?) [ DAY | MONth | YEAr | j ] { , i } 143 Set date
TBMODE(?) { AUTO | INternal | i } 143 Set the 10 MHz timebase
TBSTAT? 143 Query the current 10 MHz timebase ext (0) or int (1)
BLAZEX(?) { BLazex | BIsync | UNIsync | i } 143 Select the BlazeX output
KEYC(?) { ON | MUte| i } 144 Turn sounds on or off
PRMD(?) { SCReen | PRNt | MONOchrome | i } 144 Set screen shot mode
SDFM(?) { CSV | MATfile | i } 144 Set data file type
FBAS(?) { s } 144 Set file name prefix
FNUM(?) { i } 144 Set file name suffix
FNXT? 145 Query next file name
DCAP 145 Screen shot
SVDT 145 Save data
Interface Commands page description
RST
146 Reset the unit to its default configuration
IDN?
146 Query the unit identification string
TST?
146 No-op, returns “0”
*OPC(?) 146 Operation Complete
LOCL(?) { i } 146 Set LOCAL (0), REMOTE (1) or LOCKOUT (2)
OVRM (?) { OFF | ON | i } 147 Set GPIB Overide Remote off (0) or on (1)