Stahl PROFIBUS DP Series, Operating Instructions Manual

Page: 104 / 108

Operating Instructions
IS1 PROFIBUS 3.00 E - Technical alterations reserved -
104
PROFIBUS DP interface for IS1+
5 IS1+ APL Driver library for PCS7
With implementing modern Siemens PCS7 based automation projects, you are often faced with special
challenges, where the standard PCS7 environment is not a solution.
The R. STAHL IS1 PCS7 APL Driver library gives you the opportunity to simply connect R. STAHL IS1
modules to the control system PCS7 from Siemens via PROFIBUS. The library contains PCS7 conform CFC
blocks and an English documentation. Standard functionalities as Driver Wizard and Asset Management are
supported.
The PCS7 driver blocks allow you to prevent errors, to save own resources and to be focused to your
automation project. You have no risk, as you have calculable costs, thanks to a professional development
team.
The APL driver library is compatible up to PCS7 V8.0 SP2.
Sales and support directly from Siemens in Karlsruhe.
Contact:
function.blocks.industry@siemens.com
Driver for PCS7 V8. 0 SP2 based IS1 GSE V3 05 supports CPM 9440 redundancy.
Support for 9442 with CPU redundancy in preparation.
Supported functionalities

Use of R. STAHL IS1 in a non redundant
S7-400 CPU system

Use of R. STAHL IS1 in a redundant S7-
400-H CPU system

Use of R. STAHL IS1 behind a Y-Link
device

Module and channel granular diagnosis

Asset Management

Driver Wizard

HART Variables
Customer benefit

Extensive library with tested and approved
driver blocks

Easy calculation of costs thanks to fixed prices

Hotline & Support from our special team

English documentation for the library