© 2022 Staheli West
239
Winterize
34
36
38
35
37
39
Remove the two rear hand-hole plugs to allow
ventilation and drying of the boiler.
Replace hand-hole plugs after dry down to prevent
rodent infestation.
If you do not want to remove the plug completely,
just slip the plug downward until the stud rests on the
bottom of the hole and hand tighten the nut to keep
the plug from falling into the hole.
If you want to completely remove the plug, peel the
gasket from the plug and remove the gasket. Then
turn the plug and remove it.
Check and manually actuate all hand valves.
Loosen nut but do not remove it completely.
While holding the loosened clamp firmly in hour
hand, tap the end of the stud down with a hammer to
break the plug loose.
DO NOT drop the plug into the boiler.
Check all camlocks and fittings for corrosion and/or
other damage.
Turn the battery disconnect switch to “OFF”.
