Error! Main Document Only.Chapter 5. Installing the Display SystemSTACK ST8130 Series Road Car Display Systems
38
Users Guide
Temperature sensors
Temperature sensors
The Display System is supplied with two each of one of the following
types of temperature sensor: Stack ST760, ST761, ST762 or ST764:
ST760 has a 1/8 BSP (Taper) thread
ST761 has a M14 x 1.5mm thread.
The ST762 temperature sensor has an M10 x 1
thread (UK, EU versions).
The ST764 temperature sensor has two terminals
and a 1/8" NPTF thread (U.S. version)
Each type of sensor can be used for monitoring both oil temperature and
water temperature.
If you find that you have a sensor with an incorrect thread, please return
it to Stack for replacement.
Fitting the temperature sensors
Fitting the temperature sensors
Mount each temperature sensor directly in the appropriate fluid line.
Screw the sensor into a suitable mounting boss, so that its end lies in the
middle of the flow of fluid.
•
Position the sensors and their cables as far as possible from sources of
intense heat and from the ignition HT leads.
