Chapter 1. Introducing the Display System
STACK ST8130 Road Car Display System
2
Users Guide
When the warning condition alarm light is switched on, a warning
message is shown on the digital display to identify the condition. You can
enable or disable the warning system for each parameter individually.
You can cancel the warning message by pressing a switch. Doing this
does not turn off the warning condition alarm light, which stays on until
the condition no longer applies.
You can redefine the preset alarm value for each parameter to a value
that is more suitable for your vehicle.
The system provides outputs for two external warning lights:
•
a gear shift warning light that is based on an RPM value that you
define for your vehicle
•
an additional alarm warning light for the alarms described above
Either model can also be fitted with an optional lap timing sensor or an
optional air temperature sensor.
ST8130 Model
ST8130 Model
The ST8130 model is used in conjunction with the ST492 pulse amplifier.
This system obtains the vehicle’s speed from pulses generated by the
rotation of the vehicle’s drive shaft or from the gear box.
ST8131 Model
ST8131 Model
The ST8131 model is used in conjunction with the ST670 wheel speed
sensor. It obtains the vehicle speed from the rotations of one of the
wheels on the vehicle.
How to Use this Manual
How to Use this Manual
Stack recommends that you unpack and connect the components in the
system before you install it in your vehicle. This will enable you to
familiarise yourself with operating the display and configuring it for the
vehicle in which you intend to install it.
This manual starts by taking you through the process of setting up the
system before installation, operating the digital display, configuring the
