SSD Drives 637f, Product Manual

Page: 38 / 95

________________________________________________________________________________________________________________________________________________________________________________________________________________________
38
Product Manual Type: 637f 07-02-10-01-E-V0304.doc
Connector assignment and functions
Digital interfaces
2.6.2 Fieldbus interface COM2
Option modules
(SUB D09 socket)
Many different functions can be implemented by optional using of the option modules .
Layout, see chapter 1.4.3
Overview:
module designation interface galvanic isolation design slot
RP 232 RS 232 - A A
RP 422 RS 422/485 - A A
RP 485 RS 422/485 X A A
RP CAN CAN X A A
RP PDP Profibus DP X B B
RP SUC SUCOnet K X B B
RP IBS
1)
Interbus S X B B
RP DEV DeviceNet X B B
RP 2CA
2)
CAN1/CAN2 X B B or C
RP 2C8
2)
CAN1/CAN2 X B B or C
1)
additional plug Interbus Rem. IN (SUB D)
2)
additional plug COM 3 (B)
2.6.2.1 additional In-/Outputs
modul designation inputs outputs connection via design slot
RP EA5
3)
5 2 COM2 B B
RP EAE 14 10 X200 C C
RP 2C8 4 4 X120 B/C B B or C
3)
no Fieldbus possibility (interface)
Caution !
The connections COM2 or COM3 B/C and X30 are implemented via SUB D09 socket.
It is to be guaranteed by the customer that an interchanging is not possible!
The solder ring jumpers JP2.8, 2.3, 2.7, 2.2 must be switched dependent on the option module.
See chapter 7.1 (factory-adjusted)
2.6.2.2 additional CAN-BUS2 interface
(Use in combination with other Fieldbus)
modul designation interface galvanic isolation design slot
RP 2CA CAN2 X C C
RP 2C8
2)
CAN2 X C C