________________________________________________________________________________________________________________________________________________________________________________________________________________________
07-02-10-01-E-V0304.doc
Product Manual Type:
637f
9
Safety precautions
Please
observe!
Especially be attended with:
The class of protection which is permitted: protective grounding; operation is
only permitted when the protective conductor is connected according to
regulations.
The operation of servo drives is not allowed under the sole use of a residual
current operated protective device as protection against indirect touching. The
servo drive may only be used in the rack or in its compact enclosure.
Furthermore the regulator is designed solely for control cabinet operation.
Work on or with the servo drive may only be carried out with insulated tools.
Installation work may only be done in a deenergized state. When working on the
drive, do not only block the active - input but separate the complete drive from
the mains.
CAUTION - risk of electrical shock
, wait 3 minutes after switching off, for
discharging the capacitors.
Screws sealed with varnish fulfill an important protection function and may not
be moved or removed.
It is prohibited to penetrate the inside of the unit with objects of any kind.
Protect the unit from falling parts (pieces of wire, fley, metal parts, etc.) during
installation or other work in the control cabinet. Metal parts can lead to a short in
the servo drive.
Before putting into operation, remove additional covers so that the unit does not
overheat. With measurements at the servo drive it is absolutely necessary to
observe the potential separation!
Stop !
SSD Drives Drives Limited is not liable for damages which occur by not
following the instructions or the applicable regulations!
