SSANGYONG KYRON 2006, Repair Manual, Page: 652 / 1105

IMMOBILIZER SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
12
7010
7. IMMOBILIZER CODING AND REMOVAL OF IMMOBILIZER UNIT
After replacing the ECU with new one, perform the variant coding. Then, insert the ignition key and perform the
immobilizer coding.
When inserting an ignition key after replacing the immobilizer unit, the ECU transmits the challenge message and
waits for the response message. The immobilizer unit indicator blinks with 0.5 Hz of interval to inform that the
immobilizer unit is not programmed (i.e. newly replaced). In this case, the immobilizer coding should be performed.
Removal of Immobilizer Unit
When Replacing the ECU
Preceding Works: Remove the battery negative cable.
3. Remove the connector from the key switch and
disconnect the immobilizer unit.
1. Remove the lower panel from the driver’s seat.
(For details, refer to BODY section.)
2. Remove the steering column shaft assembly.
(For details, refer to STEERING section.)
When Replacing the Immobilizer Unit or Key Head Part