SSANGYONG KYRON 2006, Repair Manual, Page: 193 / 1105

CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
MANUAL TRANSMISSION
KYRON SM - 2005.09
69
3170
BRAKE
A / BAG
A/T
M/T
CLUTCH
AXLE
SP
ST’NG
A / CON
T/C
10. Put the probe end of the gauge on the main taper
roller bearing outer race and measure the end play.
1) If the measured value is out of the specified range,
adjust it by using spacers.
11. Apply the sealant to the front fork cover and tighten
the bolts (14 mm).
Measure the starting torque after installation.
Installation Notice
End play 0 ~ 0.05 mm
End play 0 ~ 0.05 mm
Starting torque
Sealant
Tightening torque
20 ~ 25 Nm
Silicon sealant -bulk#732
17 ~ 26 Nm
8. Set up the dial gauge on the transmission housing
surface and put the gauge needle to “0” point.
9. Put the probe end of the gauge on the taper roller
bearing outer race in counter gear and measure the
end play.
1) If the measured value is out of the specified range,
adjust it by using spacers.