SSANGYONG KYRON 2006, Repair Manual, Page: 491 / 1105

CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR BAG SYSTEM
KYRON SM - 2005.09
31
8810
BRAKE
A / BAG
A/T
M/T
CLUTCH
AXLE
SP
ST’NG
A / CON
T/C
11. DIAGNOSIS
Trouble
Code
Defections Action
1101
1102
1103
1346
1347
1348
1349
1352
1353
1354
High battery voltage
Low battery voltage
Low communication voltage
for curtain air bag sensor
Driver’s air bag circuit
resistance is too high
Driver’s air bag circuit
resistance is too low
Driver’s air bag circuit is short
to ground
Drivers air bag circuit is short
to battery voltage
Passengers air bag circuit
resistance is too low
Passengers air bag circuit
resistance is too high
Passengers air bag circuit is
short to ground
• Check alternator output voltage.
• Check battery condition (over 21.4 V for 16 seconds).
• Check air bag unit terminals for damage.
• Check alternator output voltage.
• Check battery condition (below 7.2 V for 16 seconds, resumes
when the voltage is normal level for 9.6 seconds)
• Check air bag unit terminals for damage.
• Check curtain air bag sensor connector.
• Check curtain air bag sensor wiring.
• Check air bag unit terminals for damage.
• Check if curtain air bag sensor is short to battery voltage or
ground.
• Check if curtain air bag sensor is defective.
• Check battery condition (below 10.6 V for 16 seconds, resumes
when the voltage is normal level for 9.6 seconds).
• Check driver air bag connector.
• Check driver air bag wiring (including clock spring).
• Check air bag unit terminals for damage.
• Resistance of squib: over 6.1
Ω
• Check driver air bag connector.
• Check driver air bag connector (including clock spring).
• Check air bag unit terminals for damage.
• Resistance of squib: below 1.1
Ω
• Check driver air bag connector.
• Check driver air bag wiring (including clock spring).
• Check air bag unit terminals for damage.
• Resistance of Firing Loop: below 2 k
Ω
• Check driver air bag connector.
• Check driver air bag wiring (including clock spring).
• Check the air bag unit terminals for damage.
• Resistance of Firing Loop: below 2 k
Ω
• Check passenger air bag connector.
• Check passenger air bag wiring.
• Check the air bag unit terminals for damage.
• Resistance of squib: below 0.8
Ω
• Check passenger air bag connector.
• Check passenger air bag wiring.
• Check air bag unit terminals for damage.
• Resistance of squib: over 4.0
Ω
• Check passenger air bag connector.
• Check passenger air bag wiring.
• Check the air bag unit terminals for damage.
• Resistance of Firing Loop: below 2 k
Ω