SSANGYONG KYRON 2006, Repair Manual, Page: 577 / 1105

CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR CONDITIONING SYSTEM
KYRON SM - 2005.09
83
6910
BRAKE
A / BAG
A/T
M/T
CLUTCH
AXLE
SP
ST’NG
A / CON
T/C
0
10
11
12
14
15
16
17
20
21
22
23
24
25
30
31
32
34
36
38
39
41
42
43
No faults
Shutdown for overvoltage
Shutdown for undervoltage
Overheating (abnormal reference value)
Overheating (difference evaluation-1)
Overheating (abnormal heater operation)
Overheating (difference evaluation-2)
Overheating (defective hardware-2)
Open glow plug circuit
Overload or short circuit of glow plug
Short circuit of glow plug
-
-
Short circuit of communication line
Abnormal speed of combustion fan
motor
Defective combustion fan motor
Overload or short circuit of combustion
fan motor0
Abnormal output of combustion fan
motor
-
-
-
Abnormal water pump operation
Overload or short circuit of water pump
Abnormal output of water pump
-
Measure battery voltage (must be < 15.9V).
Check alternator and overvoltage.
Measure battery voltage (must be > 10.2V under load).
Check alternator, wiring and undervoltage.
Temperature at overheating sensor > 125°C: check cooling system.
Check temperature sensor and overheating sensor, replace if necessary.
Difference in temperature values between surface sensor and con-
trol overheating sensor is too large. (Prerequisite for this trouble
code display is that the heater is in operation and the water tem-
perature at the overheating sensor has reached min. 80°C): check
cooling system.
Check temperature sensor and overheating sensor, replace if nec-
essary
Heater does not operate (The controller is locked.)
Delete trouble code to release controller lock: check cooling system.
Check temperature sensor and overheating sensor, replace if nec-
essary
If the surface sensor has a far higher temperature value than the
control overheating sensor, then the system proceeds with a fault
shutdown.
Temperature at control overheating sensor > 130°C: check cooling
system
Check temperature sensor and overheating sensor, replace if
necessary.
Check plug cable for damage, replace if necessary
Check plug cable for damage, replace if necessary
Check plug cable for damage, replace if necessary
-
-
Check the communication line.
Defective fan wheel or combustion air fan motor
(frozen, contaminated, stiff, damaged cable)
Check cable harness for damage, replace if necessary.
Defective fan wheel or combustion air fan motor
(contaminated, stiff)
Check cable harness for damage, replace if necessary.
Check the ground and short of combustion air fan motor circuit,
replace if necessary.
-
-
-
Check connector.
Check connector.
-
Remedies Trouble Description
Trouble
Code