SSANGYONG KYRON 2006, Repair Manual, Page: 405 / 1105

CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ABS/ESP SYSTEM
KYRON SM - 2005.09
19
4890
BRAKE
A / BAG
A/T
M/T
CLUTCH
AXLE
SP
ST’NG
A / CON
T/C
When depressing the accelerator pedal, HDC system is changed to stand-by mode. When depressing the
brake pedal, HDC continues its operation and the braking power is increased.
In this case, HECU sounds an abnormal noise and brake pedal may be very rigid, but this is a normal
condition due to HDC operation.
When depressing the accelerator pedal or brake pedal, HDC system is changed to stand-by mode. When
depressing the accelerator pedal again, HDC starts its operation again. Therefore, drivers can control the
vehicle speed to a desired level by operating the accelerator pedal.
5. Vehicle position control function in ESP and HBA function are not in operation:
The HDC is the device to improve the engine brake effect during downhill driving on a steep hill. If the ESP
function is in operation, HDC operation is overridden.
6. Slope level exceeds 10%.
When the slope level exceeds 10%, the HDC operates until the vehicle reaches the speed value given in step (4).
When the slope level is between 10% and 20% during the HDC operation
When the slope level exceeds 20% during the HDC operation
and