SRP aero Lynx VTOL, User Manual

Page: 157 / 172

5. Plug in the micro USB cable to the autopilot.
6. The GCS will detect the autopilot, erase the old firmware, and upload new firmware.
Under certain rare scenarios the computer can develop a problem communicating over the USB cable. If no progress is made
during the firmware upload for more then 30 seconds, unplug the USB cable and go back to step 4 to restart the firmware
upload.
7. When the firmware upload has been completed, a dialog box will open and the autopilot will automatically reboot. Press the
Close
button to proceed.
8. The GCS will then prompt if you would like to automatically update any new parameter values. Select
Update Parameters
to
automatically scan for and connect to the autopilot.
This step relies upon the
Auto Detect
method of connecting working. If this is not available then please contact support for
an alternate way to update the parameter values.
9. Once the GCS finds the autopilot, it will download and then upload a new set of parameters.
10. When the process has been completed a dialog will open. Select
Close
to finish the process.
11. The aircraft should be power cycled before attempting to fly.
Firmware Update
157