29
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
7. Align the dot on the outer ring of the
battery cap with the recessed dot on the
inner ring of the SLED. While pressing the
end of the SLED into the spindle with your
thumb, use your fingers, or a spanner
wrench if necessary, to turn the battery
cap counter-clockwise 90 degrees, in the
direction of the arrow, until the dot on the
outer ring is aligned with the raised dot
on the inner ring.
Adjust
Régler
Ajustar
Einstellen
Regolare
調節
Ajustar
Afstellen
调节
7