SportsPlay QUICK SHIP 1 MODIFIED, Installation Instructions Manual

Page: 73 / 112

February 17, 2010 5
912-881 MUSIC PANEL
INSTALLATION INSTRUCTION
INSTALLATION STEPS CONTINUED
____4) Attach panel attachment brackets You will need the four
panel attachment brackets (2), four attachment bracket gaskets (3),
sixteen self tapping screws (4). Determine the proper placement
for the panel attachment brackets. (This will vary with different
deck heights and locations). You will need to mock up the panel
and Attachment Brackets to determine this. Secure the panel
attachment brackets to the posts using the self-taping screws with
the attachment bracket gasket between the post and the attachment
bracket. (SEE DETAIL A)
-
TIP: It’s easier to install the self-tapping screws if you pre drill
the holes in the post with a #7 drill bit by marking the hole
locations with a dry erase marker
__5) Mark holes: Once you have all four of the panel attachment
brackets installed, locate the panel. With help lift the panel into
place and mark the holes in the tab of the panel attachment bracket
on the panel. IT IS EXTREMILY IMPORTANT THAT YOU
MAINTAIN A MAXIMUM OF 3” DISTANCE BETWEEN THE
TOP, BOTTOM, OR SIDES OF THE PANEL AND THE
NEAREST EDGE OF THE DECK OR POSTS.
__6) Drill a1/2” hole in the panel at the marks made from the panel
attachment brackets
DETAIL A