SportsPlay QUICK SHIP 1 MODIFIED, Installation Instructions Manual

Page: 68 / 112

September 17, 2014 8
912-807 SAND & WATER PANEL
INSTALLATION INSTRUCTION
INSTALLATION STEPS CONTINUED
__7) Install the Acrylic Domes in Bubble Basin To complete this
step you will need the two 12” acrylic domes with the drain
assemblies installed in the previous step. You will also need
sixteen 3/8” Flat Washer (12), sixteen 3/8” x 1 1/4” Button Head
Bolt (13), sixteen 3/8” T Nuts (14), and sixteen Rubber Washers
(16). Place the acrylic domes into the bubble basin (drain facing
the ground). Each bolt will need a 3/8 Flat Washer installed on it
first then a rubber washer and placed into the factory drilled hole
and secure it with the 3/8” T Nut on the bottom of the Bubble Basin
(see detail C) The 3/8” T Nut must be installed with the flat side
facing the ground. Do not use locktite on this step. (SEE DETAIL
C)