SportsPlay QUICK SHIP 1 MODIFIED, Installation Instructions Manual

Page: 23 / 112

Value Series
Installation Guide
2/28/11 V-C_OUTLINE.V1.0211 16
4. It is recommended that you use a transit to level the remaining postholes
to the first hole in order to ensure that the posts are level.
5. Using the post identification drawing (4
th
page of this booklet) identify
which post goes in each hole by matching the number on the post with
the number on the drawing.
Step 3: Deck, Post & Component Installation
1. The easiest way to install the playground is by starting with the central
deck and then work out. We recommend installing the posts and central
deck and once the post and deck are square and level you may add the
concrete (concrete with a minimum of 2,500 psi should be used). Mix
concrete per manufacturers instructions and let it cure for at least 24
hours before continuing.
2. NEVER LEAVE THE INSTALLATION SITE UNATTENDED
WITHOUT ROPING OFF THE AREA AND EQUIPMENT,
INSTALLING ALL HARDWARE, SECURING TOOLS AND
EQUIPMENT, AND COVERING OPEN HOLES WITH A RIGID
MATERIAL (PLYWOOD). CHILDREN WILL TRY TO USE
THE EQUIPMENT EVEN THOUGH ITS NOT FULLY
ASSEMBLED. YOU MUST TAKE ACTION TO PREVENT
INJURY AND DAMAGE.
3. Once the first deck is installed and the concrete has set for 24 hours you
can install the remaining decks working out from the first deck ensuring
all decks and posts are square and level as you go.
4. Level and plum all posts and decks and then brace them in position.
5. Beginning at the lowest deck, install all playground components. When
installing the four hole brackets be sure to orientate the bracket so that
the setscrew faces down. Use the footing layout at the beginning of this
booklet to layout your component holes. Once the entire playground has
been installed and the entire unit is level you may start adding the
concrete.
FOOTING SIDE VIEW