18
SPORTDOG.COM
GE
TT
IN
G S
TA
RT
ED
E-COLLAR SETTING
Next
, the Wizard will ask “Does this collar include an E-Collar module?”
Select Yes or No, then select
Next
to move on.
PAIR THE COLLAR
Follow the instructions to pair the current collar with your TEK 2.0 Handheld.
The collar must be on and in pairing mode (press and hold your collar’s on/off button until the Indicator Light
turns amber). When the collar indicates pairing is complete (Indicator Light flashes green five times), press
Next
.
Select
Next
to move on.
ADDITIONAL COLLARS
Next the Wizard will ask “Would you like to add another collar?”
• Selecting
Yes
will take you through the collar setup process again.
• Selecting
No
advances to the Next step in the Wizard.
ASSIGN COLLARS
This screen will display a list of available dogs and asks you to assign collars.
Select a dog and then choose a collar to assign to it. If you try to select a collar that is already assigned, a warning
message will appear. If you choose “Deactivate”, the original collar assignment will deactivate and the collar will
be assigned to the current dog.
When you’re done assigning collars, select Done to move on.
ENTER HANDHELD NAME
This screen lets you Enter a name for TEK 2.0 Handheld. This is the name you’ll use when you share your
Handheld information with other hunters.
Press
Enter
to bring up the keyboard, then Enter the name.
When you’re finished, select the checkbox, then
Next
to move on.
CALIBRATE COMPASS
To calibrate the handheld’s compass, you’ll need to rotate the Handheld in all three dimensions until all the
circles shown on the screen are as close as possible to the center of the bars.
When you have successfully calibrated the handheld, the screen will notify you by displaying “Calibration
Successful.”
Select
Next
to move on.
