Splendide WD2000S, Training Manual

Page: 41 / 72

Accessing the Components
35
Removing the Drain Pump
With the Lower Panel removed and any residual water drained
from the unit, gently tip the washer onto its’ left side.
Remove the 4 screws that secure the sheet metal cover to the bot-
tom of the washer. (Below) Remove the metal cover.
Remove the two screws that secure the pump to the cabinet. (Fig.
4-23) Rotate the pump clockwise from inside the unit and then
pull to remove it from the cabinet.
Removing the Lower Panel
Gently ease down the top of the panel with a fl at blade screw-
driver or plastic putty knife.
Remove the panel by lifting slightly and pulling forward.
(Below)
Lower Panel / Drain Pump / Pump Filter
The Drain Pump is located at the lower, right-corner of the machine.
You’ll need to remove the Lower Panel to access the Drain Pump and Pump Filter.
(Continued on the next page)