SplashMe Automation Controller 1.0 | Installation and Operating Instructions
© Nymet Innovations Pty Ltd 2019 | Revised November 2019
6
1.4 LED definitions
Once the SplashMe Automation Controller has been connected to a power source, the blue
connection light will blink, and the device is ready for setup.
Type
Description
Blue “slow” blinking
light
Device is in “Direct Access” mode awaiting a connection or
The device is ready for first time setup. “Direct Access” mode is
when the SplashMe Automation Controller connects directly with
the user App without the use of a gateway (router)
Blue solid light
Device has established an internet connection and is
communicating with the SplashMe server. Referred to as
“Remote Access” mode
Blue “fast” blinking light Device has lost WiFi Connection and is not able to be controlled
Via Remote Access Mode
Green solid light
Device is running a user set schedule
Green “fast” blinking
light and Beep every 5
seconds
Device has been “paused”. This causes all running equipment to
cease operation.
Red solid
Device is in error or alert state. Check the SplashMe App for
information