SplashMe Automation Controller 1.0 | Installation and Operating Instructions
© Nymet Innovations Pty Ltd 2019 | Revised November 2019
31
Section 4 – Main electrical supply
4.1 – Power requirements
To achieve full functionality of all the auxiliary outputs, the SplashMe Automation Controller
requires a total of 3 x 10A RCD protected socket outlets each connected to a separate 16A
circuit and circuit breaker.
The socket outlets need to be mounted within 1.5 m of the SplashMe Automation Controller
to ensure the supplied plugs will reach.
Note
Check local standards/codes for compliance requirements
Warning
All electrical connections and installations to be done by a
licenced
electrician
Auxiliary inputs to be connected to a separate 16A circuit and circuit
breaker