05311001B / Revision 4
23
6.1
Mechanical installation
Figure 11 - OxyDetect dimensions (in millimeters)
Use 4 x M6 or similar fixings to secure the instrument to a suitably ridged wall
or ridged mounting bracket.
Leave access to either the side or bottom gland entry holes, which are 22mm
in diameter.
Leave access so that the door may be fully opened after installation.
6.2
Electrical Installation
6.2.1 Electrical Safety
Obey the safety instructions given below when you install the
instrument; if you do not, the instrument warranty may be
invalidated, the instrument may not operate correctly, or it may
be damaged.
Respectez les consignes de sécurité indiquées ci-dessous
lorsque vous installez l'instrument; si vous ne faites pas, la
garantie de l'instrument peut être invalidé, l'instrument peut ne
pas fonctionner correctement, ou il peut être endommagé.
