05311001B / Revision 4
59
9.2.2 View history messages
1.
Select
Status
View history.
2.
Each message shows:
Date and time of message.
The message type ("Fault", "Maintenance rqd" or "Service in Progress").
The message itself.
The status of the entry "ON" or "OFF".
Figure 42 - The message status screen
Refer to Section 9.1 for the recommended actions associated with the displayed
messages.
A maximum of 100 status messages can be stored.
9.3
General fault finding
For general instrument fault finding, refer to the table on the following pages.
If you have read through the table and still cannot rectify a fault, or cannot identify the
cause of a fault, contact Servomex or your local Servomex agent for assistance.
Fault symptom
Recommended actions
The fault LED is on.
Check
any
current
fault
messages
(see Section 9.2), and carry out the recommended
actions (see Section 9.1).
If there are no applicable fault messages stored,
or if you cannot rectify the fault after you have
carried out the recommended actions:
Switch off the instrument, then switch it on
again.
If the fault persists, contact Servomex or your
local Servomex agent for assistance.
