Spectris Servomex 05311B1 Operator'S Manual Download Page 19

Page: 19 / 88

4 – Unpack the instrument

OxyDetect Oxygen Deficiency Gas Detector

05311001B / Revision 4

4 UNPACK THE INSTRUMENT

The instrument is delicate and care must be taken when
handling.

L'instrument est délicate et il faut prendre soin lors de la
manipulation.

1. Remove the instrument and any other equipment from its packaging.



It is advisable that the gland entry blanking plugs are only removed just prior
to product installation.

2. Inspect the instrument and the other items supplied, and check that they are not

damaged. If any item is damaged, immediately contact Servomex or your local
Servomex agent.

3. Check that you have received all of the items that you ordered. If any item is

missing, immediately contact Servomex or your local Servomex agent.

4. If you do not intend to use the instrument immediately:



Refit any protective plastic covers.



Place the instrument and any other equipment supplied back in its protective

packaging.



Store the instrument as described in Section 10.1.

Otherwise, read Section 5 (Instrument user interface), and then continue at
Section 6 onwards to install, set up, and use the instrument.



Retain the shipping documentation and packaging for future use (for example,
return of the instrument to Servomex for servicing or repair).

Summary of Contents for Servomex 05311B1

























































































Search results

Summary of Contents for Servomex 05311B1

Reviews:

Related manuals for Servomex 05311B1

Brands by name

Popular brands

Spectris Servomex 05311B1, Operator'S Manual

Search results

Summary of Contents for Servomex 05311B1

Reviews:

Related manuals for Servomex 05311B1

Brands by name

Popular brands