Chapter 3. Using the RXT-150
27
Changing User Passwords
The administrator has rights to change passwords on either account, and the operator
can change only the operator’s password.
To change passwords for the administrator and operator, follow the steps below.
1.
Select
Maintenance > Diagnostics
; the RXT Diagnostics screen appears.
2.
Select
Password Change
, then select
Run Diagnostic
; the Password Change
Diagnostic screen appears (Figure 3-7).
3.
In the appropriate fields:
• Enter the password for the user currently logged in
• Enter the user account to change (administrator or operator)
• Enter the new password for the account
• Re-enter the new password for the account
4.
Select
Save
.
Note:
If you change the password for the user currently logged in, that
user will automatically be logged off. Simply use the new
password to log in again.
Figure 3-7
The Password Change Diagnostic screen.
