Chapter 3. Using the RXT-150
22
Web Interface Messages
The RXT-150 proactively provides information to users by way of the Messages icon in
the status bar of the Web interface (Figure 3-2).
The Messages icon indicates whether the RXT-150 and RXT media are functioning
properly and if there are messages, using these designations:
When you select the Messages icon on the status bar (Figure 3-2), the System Messages
screen appears. Read the message(s) and follow any recommended steps. Contact
SpectraGuard Support if you need help with a RXT media pack or the RXT-150.
RXT-150 Front Panel
The RXT-150 front panel, along with the Web interface, provides status information.
Digital Display
The RXT-150’s digital display provides
information as well as prompts for user action. Request
information and answer prompts using the Select and
Load/Unload buttons, which are located directly beneath
the digital display.
Digital
Display
Status
Light
Select
Load/
Unload
Figure 3-3
The front panel.
Ready Mode
After the RXT-150 initializes, the status
light (in the lower right corner of the digital display)
flashes steadily and the display is blank (showing no
symbol, letter, or number). This mode indicates that the
drive is ready for operation. When you are in ready
mode, you can change RXT-150 states using the Select
and Load/Unload buttons.
To interpret codes that flash in the display on the front
of the RXT-150, refer to
Interpreting Flash Codes
on
page 59.
Figure 3-2
The Messages icon on the status bar.
Symbol
Description
Meaning
A check mark in green
All is functioning correctly.
An i
in blue
Check messages for information.
An exclamation point in yellow
Check messages for status.
An X in red
Check messages for error.
Messages icon
