Chapter 1. Introduction
10
RXT-150 Web Interface Introduction
Use the Web interface to access, configure, and use the RXT-150. Two other methods
are also described where appropriate: the digital display, and the serial interface.
Note:
Use the Web interface as much as possible, as it provides the most
comprehensive features and is easiest to use.
To use the Web interface, open a Web browser, then enter the RXT-150’s IP address in
the address bar.
Note:
If you don’t have the drive’s IP address on hand, use the serial
interface or digital display to identify the address by following the
procedure in
Displaying the RXT-150’s IP Address
on page 25.
Once your Web browser connects to
the IP address of the RXT-150, it
automatically brings up a login
screen. Log in as either administrator
or operator, then enter the password
to access the complete user interface.
For detailed instructions on logging
in, see
Logging on to the Web
Interface
on page 13; for information
about using the Web interface, refer
to
Interpreting the Web Interface
on
page 21.
Note:
The RXT-150 supports only one Web session at a time.
