User’s Manual
46
SSID:
Please input the SSID (the name used to identify this wireless access point) here. Up to 32
numerical characters can be accepted here, excepting space.
TX Rate:
Please select the data transfer rate here. The maximum TX rate you can select here
depends on the wireless mode you’re using. It’s safe to select ‘Auto’ to let wireless card
select a proper TX rate according to the strength and quality of radio signal. When the
wireless mode is set to ‘802.11 B/G/N Mix’, TX Rate will be set to ‘Auto’ and cannot be
changed.
Channel:
Please select the wireless channel you wish to use. The number of channels available here
will vary depends on the setting of ‘Country Region Code’.
Wireless Mode:
Please select the wireless operating mode. You can limit the type of wireless client to
802.11b or 802.11g only, or allow 802.11b/g, and 802.11b/g/n clients. It’s safe to select
‘802.11 B/G/N mix’ to allow all kinds of wireless client to connect to your computer, unless
you want to limit the type of wireless client allowed to connect to your computer.
Use Mac Address:
Click this button to use the MAC address of the wireless card as SSID. A prefix of ‘AP’ will
be added.
Security Setting:
Set the security options (wireless data encryption) Please refer to chapter 3-2 ‘Security
Settings’ for details.
Country Region Code:
Available options are 0-7, which will affect the available wireless channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
The operating frequency channel will be restricted to the country / region user located
before importing.
Wireless Protection:
Wireless protection will prevent data collision when there are both 802.11b and 802.11g
clients. You can select ‘Auto’ to let configuration utility to decide to use wireless protection
or not. You can also select ‘ON’ or ‘OFF’ to force the use of wireless protection or not.
Beacon(ms):
You can define the time interval that a beacon signal should be send. Default value is 100.
Do not modify this value unless you know what will be affected.
Idle Time:
Select the idle time of your wireless network card. Default value is 300. Do not modify this
value unless you know what will be affected.
No forwarding among wireless clients:
Check this box and wireless clients will not be able to share data with each other.
Hide SSID:
Check this box and the SSID will not be broadcasted to the public. Your wireless clients
must know the exact SSID to be able to connect to your computer.This option is useful to
enhance security level.
Allow BW 40 MHz:
