User’s Manual
15
4.1 Connect to Wireless Access Point
Configuration utility will scan for all wireless access points automatically. Scan results will
be displayed here, please check if the wireless access point with the SSID (the name of
wireless access point) you preferred is shown here.
If the wireless access point you wish to connect does not show here, please click ‘Rescan’
to try again, until the one you preferred is displayed. You may have to click ‘Rescan’ for
more than two times before you can see the access point you wish to use here sometimes.
1.
Click the wireless access point or network device you wish to connect, it will be
highlighted, then click ‘Connect’.
If the access point you selected does not enable encryption (The content of ‘Encryption’
field of the access point you selected is ‘None’, you’ll be connected to this wireless access
point within one minute. Please jump to step 4.
If the access point you selected enables encryption, please proceed to next step.
