![Sparklan WUBR-502GN User Manual Download Page 27](http://html.mh-extra.com/html/sparklan/wubr-502gn/wubr-502gn_user-manual_1339737027.webp)
User’s Manual
27
Encryption:
Select the encryption type of the wireless access point or wireless device you
wish to connect. If you’re adding a profile from an existing access point or wireless device,
the value will be selected automatically, and please do not modify it.
WPA Preshared Key:
Input WPA preshared key here. If encryption is not enabled, or you select ‘WEP’ as
encryption type, this field will be disabled and grayed out.
WEP Key:
You can select key type (Hex or ASCII) and input WEP key here. If encryption is not
enabled, or you select ‘WPA’ as encryption type, this field will be disabled and grayed out.
Show Password:
Check this box and all passphrases or security keys you inputted will be displayed as you
type, but not replace your input with asterisk.
802.1x:
Enable 802.1x wireless authentication. Please click ‘802.1x Setting’ button to set 802.1x
parameters. (See next section).
After you finish all settings, click ‘OK’ to save settings and exit. The profile you just created
will be displayed:
Select the profile you wish to use, and click ‘Activate’ to use the profile you selected. If you
want to change the connection parameters of a specific profile, just select it and click ‘Edit’
button, you’ll be prompted to input the connection parameters, just like you’re creating a
new profile. If you no longer need a profile, select the profile then click ‘Delete’.