User’s Manual
39
3. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on your wireless access
point (the button used to activate WPS standby mode may have another name), or use
other way to start WPS standby mode as the instruction given by your wireless access
point’s user manual.
4. Before you start to establish the wireless connection by using WPS, you can click
‘Rescan’ button to search for WPS-enabled access points near you, to make sure the WPS
function of your access point is activated.
All access points with WPS function enabled will be displayed. Please make sure the
access point you wish to connect is displayed. If not, please click ‘Rescan’ few more times.
You can also click ‘Information’ button to see the detailed information about selected
access point.
