User’s Manual
34
4.5 Advanced Settings
This wireless network card provides several advanced settings for experienced wireless
users. You can change these settings to increase data transfer performance, or change
operation mode.
Please follow the following instructions to set advanced wireless settings:
1. Right-click the Ralink configuration utility icon located at lower-right corner of computer
desktop, then click ‘Launch Config Utilities’.
2. Click ‘Advanced’ tab, and the following settings will appear:
Wireless mode:
Select wireless operation mode, available options are 802.11 B/G mix, 802.11 B only, and
802.11 B/G/N mix. You can select 802.11 B/G/N mix to maximize wireless compatibility
with wireless access points and other wireless devices. Anyway, you can set this setting to
‘802.11 B only’ when you’re going to communicate with old 802.11b wireless devices and
you got problem using other two modes.
TX BURST
Check this box to accelerate the data transmit rate. It may not work with all wireless access
point and wireless devices.
Enable TCP Window Size:
